Veloteq Ebikes Advanced FeaturesThe new advanced features on Veloteq 2007 models add a whole new dimension to electric bicycles as an alternative means of low-cost, pollution-free local transportation.... Veloteq ebikes for 2007 are equipped with a host of the latest technology upgrades that are guaranteed to insure you a smoother and safer ride. Drawing on years of experience with Honda, our engineers have incorporated features normally found only on very high end motorcycles.
The BLDC (brushless dc motor) incorporates a high performance, very high power,
rare earth nickel-dymium boron (NIB)) permanent magnet, outer-rotor direct drive
wheel, and an ECVT (electronic controlled variable transmission) featuring
efficiency, energy economy, long life, and maintenance-free, noise-free
operation. Boron, a non-conductor, replaces iron (ferrite) material which
conducts heat, reducing motor overheating. |
Total Power System Design
Veloteq electric bicycles are designed specifically for the North American market, unlike other models available that are merely improvisations on old, low power designs intended for use on other countries. They speak quality throughout, what you expect and deserve from vehicles intended for on road use. Now with dynamic power regeneration they even pump power back into the power supply while braking, coasting or traveling downhill. Whenever the motor is not drawing power it is generating power. We use the most recently designed, very high efficiency brushless DC motors constructed of the highest quality materials that are currently available. The motor is the one of the most important components our power and electrical systems. Combined with our power supply which is rated for continuous use for two years with four 20Ah batteries and high power handling controller it is optimized to deliver the maximum speed allowed by law in the US and Canada enabling greater grade climbing ability and an outstanding travel range of over 50 miles (80 kms). The combination of the power supply, controller and motor is the key to insuring that you will receive maximum performance under all road conditions and long life and reliability of the power system. 16-3.0 wide-tires mounted on polished alloy wheels offer better traction and smoother, better controlled turning. These are the same outer diameter as those used on 18" electric bicycle wheels but give better road performance. |
Advanced Suspension Systems
A-arm suspension systems are used on the front end, as opposed to the commonly seen telescoping suspension. This permits the front wheel to rock in response to rough roads and affords greater mobility while turning or swerving. Instead of putting all of the stress on the suspension arm and the frame it brings the entire front end into play insuring a safer ride. This design in usually seen only on high-end motorcycles. The Cougar XR7 uses hydraulic reverse telescoping front suspension which reduces shock and frame stress by absorbing it at the wheel base, not the top of the suspension arm. The rear suspension arm is vertically oriented, not raked backwards from the frame. The suspension arm absorbs the weight of the ebike and rider downwards instead of at an angle, cushioning the ride and relieving stress on both the arm and ebike frame. A line between the angle formed by a line from the upper arm attachment to the ground and the upper arm attachment angle to the ground is called the "trail". The shorter the distance is, the less the stress on both the suspension arm and the frame, resulting in a smoother, better controlled ride. Try a simple experiment. With a hand held level in front of you poke straight up to the palm of your hand. Then poke the same spot at a 45o angle. Repeat this poking from smaller angles. You will feel very little stress when you poke straight up. When you poke at an angle you will feel great stress on the finger joints which passes to the wrist and further up the arm. This is how the telescoping suspension works. |
Brake System
Veloteq 2007 ebikes use high quality cushioned motorcycle drum brakes to guarantee smooth and quick braking under all weather conditions. They will bring your ebike to a stop within eight feet at the maximum permitted speed of 20 mph (32 kmh). They exceed all requirements for bicycle brake systems under CPSC regulations and also those of the Canada Motor Vehicle Safety Act for motorcycles. It is not always necessary to use the brakes to reduce speed, releasing the cruise control if it is engaged or if not simply releasing the throttle will automatically reduce speed. While coasting or braking power is generated which flows back into the power supply to increase range or compensate for power used by electrical accessories. |
Frame and Fairings
Veloteq ebike fairings (body parts) have a high-gloss,
scratch-resistant enamel finish that requires little maintenance other then the
care you choose to give them to keep them shining. They are securely fastened to
the frame underneath to prevent breakage when you encounter bumps or a rocky
road. Fairings are motorcycle grade. The welded steel frame is made to motorcycle standards. It is rust-treated to deliver a lifetime of use and carries a 5-Year Warranty. Side view mirrors have long arms and are fully adjustable to permit you to see the road behind you, not just yourself. You can aim them in or aim them out to suit your height or where you prefer to sit. |
Instrument Panel & Cruise Control
The instrument panels on Veloteq 2007 models feature a large, back-lighted display for nighttime operation, a speedometer calibrated in miles per hour and kilometers per hour, a 5 digit odometer, turn signal and headlight indicators, and a power supply level indicator. The headlights and taillight turn on automatically when the power key is in the ON position. Ample power is provided by the large power system and dynamic power regeneration. Cruise control is fully automatic. Maintaining the throttle position for 6 seconds activates the cruise control for the speed selected. It is automatically deactivated by a momentary depression of either the front or rear brake handle. You do not have to maintain hand and wrist pressure to travel at your desired speed. |
Lighting Systems
Large rear tail lights, brake lights and turn signals insure that will always be seen from behind and to the sides while riding at night. Wheel reflectors together with a front end reflector and large bright headlights make you visible from all around. |
Total Security
Veloteq 2007 models incorporate a three-tiered system for protection against theft or tampering with your ebike. Some people may want to steal it and you can see why. Our digital rear wheel and motor lock completely disables all functions of the wheel and motor assembly. Simply put, if you don't unlock it with your key, it will never start. Each set of keys is individually cut to match the lock and cannot be duplicated. Spare keys are provided for you and your dealer for each Veloteq ebike so you will always have a backup, but don't leave it behind while you are traveling. When you park your ebike the front steering column automatically locks in place so it can only go in one direction until you unlock it, around in circles. In addition each bike has an audible alarm system which emits a loud and piercing alert if anyone tampers with your bike or even attempts to move it a few inches. It will sound and continue to sound each time an attempt is made to move or tip your ebike, independently of the wheel lock. Two remotes are included. |
